Pirms pasūtīt šo preci, lūgums sazināties ar mums un izvēlēties preces krāsu. (Melns vai Sudraba)
| Power RMS ≤ 1% THD+N | RX2 PRO with digital input module |
| – @ 4 Ohms | 2 x 300 Watts |
| – @ 2 Ohms | 2 x 510 Watts |
| – @ 1 Ohm | – |
| – bridged @ 4 Ohms | 1 x 930 Watts |
| – bridged @ 2 Ohms | – |
| Amplifier technology | PURIFIs “EIGENTAKT” Class D |
| Inputs | 1 x Optical SPDIF (32 – 96 kHz) 1 x Coaxial SPDIF (32 – 192 kHz) 1 x Remote In 1 x Power Stabilizer Input |
| Input sensitivity | |
| Input impedance RCA / Cinch | |
| Input impedance highlevel | – |
| Outputs | 2 x Speaker output |
| Output voltage RCA / Cinch | – |
| Signal converter for digital input | ESS 9039Q2M with HyperStream IV Dual DAC technology and advanced SABRE HiFi architekture / Supports Audiotec Fischers proprietary DiSAC technology |
| OpAmp analog input | – |
| Frequency response | 10 Hz – 60 kHz |
| Bass boost | – |
| Highpass | – |
| Lowpass | – |
| Bandpass | – |
| Subsonic | – |
| Phase | – |
| Slope high- / lowpass | – |
| Slope subsonic / lowpass | – |
| Signal-to-noise ratio digital input | > 125 dB (A-weighted) |
| Signal-to-noise ratio analog input | – |
| Distortion (THD) | < 0.0002 % |
| Damping factor | > 10,000 |
| Operating voltage | 9 – 18 Volts (max. 5 sec. down to 6 Volts) |
| Idle current | 1.5 A |
| Power rating | DC 12 V ⎓ 150 A max. |
| Fuse | 4 x 25 A LP-Mini-fuse (APS) |
| Operating temperature range | -20° C to +70° C |
| Additional features | Based on Purif’s EIGENTAKT technology, BRAX Power Stabilizer connector, Start-Stop capability, input mode switch |
| Dimensions (H x W x D) | 56 x 310 x 200 mm / 2.21 x 12.21 x 7.87″ |
| Net weight | 4.0 kg |
| Kanālu skaits | 2 |
|---|---|
| Zīmols | Brax |
Klientu atsauksmes
Saistītie Produkti
Vēl nav nevienas atsauksmes.