Name: MATCH UP 10DSP MK2
SKU: UP 10DSP MK2
Availability: InStock

Power RMS ≤ 1% THD+N
– @ 4 Ohms	Channels A – H: 65 Watts (min. 3 Ohms) Channels I – J: 75 Watts (min. 3 Ohms)
– @ 2 Ohms	Channels I – J: 125 Watts
– @ 1 Ohm	–
– bridged @ 4 Ohms	–
– bridged @ 2 Ohms	–
Max. output power per channel**	Channels A – H: up to 80 Watts RMS @ 4 Ohms Channels I – J: up to 90 Watts RMS @ 4 Ohms Channels I – J: up to 160 Watts RMS @ 2 Ohms
Amplifier technology	Class GD
Inputs	8 x Highlevel speaker input 1 x Optical SPDIF (12 – 96 kHz) 1 x Extension Card 2.0
Input sensitivity	Channels A – F: 4 – 16 Volts Channels G – H: 4 – 32 Volts
Input impedance RCA / Cinch	–
Input impedance highlevel	9 – 33 Ohms with ADEP.3
Outputs	10 x Speaker output 1 x RCA / Cinch 1 x Remote Out
Output voltage RCA / Cinch	3 Volts RMS
Frequency response	15 Hz – 22,000 Hz
DSP resolution	64 Bit
DSP power	295 MHz (1.2 billion MAC operations/second)
Sampling rate	48 kHz
DSP type	Audio signal processor
Signal converters	A/D: BurrBrown D/A: BurrBrown
Signal-to-noise ratio digital input	105 dB (A-weighted)
Signal-to-noise ratio analog input	103 dB (A-weighted)
Distortion (THD @ 1 kHz, 1 W into 4 Ohms)	< 0.015 %
Distortion (THD+N @ 1 kHz, 1 W into 4 Ohms)	< 0.02 %
Distortion (THD @ 100 Hz, 1 W into 4 Ohms)	–
Distortion (THD+N @ 100 Hz, 1 W into 4 Ohms)	–
Operating voltage	10.5 – 18 Volts (max. 5 sec. down to 6 Volts)
Power rating	DC 12 V ⎓ 60 A max.
Idle current	500 mA
Max. remote output current	500 mA
Operating temperature range	-40° C to +70° C
Fuse	2 x 25 A LP-Mini-fuse (APS)
Additional features	Class GD technology with dynamically controlled power supply, 32 Bit CoProcessor, ADEP.3 circuit, Start-Stop capability, Smart Control Port, USB-C, Auto Remote switch
Dimensions (H x W x D)	46 x 145 x 163 mm / 1.81 x 5.71 x 6.42″